Mortar that meets the requirements of ISO 14081, especially suitable for laying in indoor and outdoor large format coating ceramic type, porcelain, marble and granite. Industries, shopping, airports, etc.: about old and new areas of intense movement where there are large vibrations and need a mortar high flexibility and grip as coatings Composed of structural white cement, selected sands and special additives.
CONDITIONS OF FINISH: Parts must be clean and dry, marbles and granites should have a maximum thickness of 2.0 cm and have waterproofed piece of data in order to prevent stains from coming layers prior to adhesive mortar. In exterior walls, not to exceed 10m in height (this height using metal fasteners).
CONDITIONS OF BASE: Cured at least 14 days (masonry, plaster and against floor) and 28days (concrete), clean, dry, flat and sturdy enough. Powder residue, oil or leftover paint, make your cleaning so as not to interfere with bonding of large supermassa formats. If they have imperfections on the surface, they shall be repaired with a minimum of 48 hours before applying the coating. The base not showing enough strength, eliminate it altogether and redo it running 14 days after coating. Subjecting the humidity ascending bases must be sealed to prevent stain on the coating.
TOOLS AND ACCESSORIES: plastic trough, trowel, steel trowel 8x8mm, with wear on the teeth less than 1 mm, a container for steps hammer rubber, plastic spacers for the joints and personal protective equipment such as gloves, boots and goggles.
Add water in the ratio indicated on the package for every 20 kg of SUPERFLEX WIDE FORMAT.
Knead vigorously to obtain a homogeneous, consistent and doughy paste.
For at least 15 minutes (aging time) before application.
Mix again and use no water up to 2 hours after
Using a trowel extending flat side Superflex a WIDE FORMAT approximately 4 mm above the base layer, and then forming splines on the toothed side. Repeat the entire procedure on the back of the plate to be applied.
Lay the pieces not exceeding the time of 20 minutes per step. Press the pieces by hand or using the rubber hammer, completely crushing the cords of SUPERFLEX WIDE FORMAT and allowing a perfect grip will play.
After 1 hour proceed to initial cleaning using a clean, damp sponge. After setting away some parts and see if your back is 100% of your completed by SUPERFEX WIDE FORMAT area.
In outdoor areas to protect for 24 hours of the action of rain.
72 hours after grout using grout SUPERMASSA. 6 days after the settlement soak the coat with water and proceed to final cleaning of parts using superclean PARTS SPECIAL and a clean, damp sponge.
Release to light traffic after 7 days and after 14 days normal traffic seat.
Never soak the coating in water before application!
Never sit on cords that are dry!
Never add more water to an already mixed mortar or beyond the use period of 2 hours!
Very porous and dry bases lightly moisten the base with water!
Observe structural and movement together!
In outdoor areas, do not apply in adverse weather conditions, such as bright sun or rain!
Use water and perfectly clean tools to prevent stains!
Using skilled labor and technical supervision under!
The application should be made in double layer, to ensure the fulfillment of the verse.
7 to 9 kg / m 2
SAFETY: Keep out of reach of children and pets. In case of eye contact or accidental ingestion seek medical advice immediately taking this container.
STORAGE: About pallets in open, dry, airy location away 30 cm from the wall. Batteries should be a maximum of 1.5 meters in height.
DEADLINE: Deadline of 240 days from the date of manufacture.
20 KG bag
© 2013 by SuperMassa. All rights reserved.
Now the chat!
Learn about our companies
For technical support and financial affairs, open a ticket at our Customer Service by clicking here.
For sales questions, contact requests or suggestions, please complete the form below.