Ready Massa - Coating
Mortar coating for indoor or outdoor areas suitable for the packaging as specified in plastering or using screed. Composed of Portland cement, selected mineral aggregates, binders and chemical additives. Classification indicated on the packaging according to NBR 13281.
Plastering: coating ceilings and walls.
Screed: Leveling of floors and slabs.
Conditions of base: The base must be clean, flat, dry and free of dust or oily substances. The bases should be chapiscadas minimum curing time of 72 hours and has adhesion, abrasion resistance, roughness and absorption sufficient for adequate anchorage of the coating. The bases for application shall be cured as technical standards, masonry and concrete 14 days to 28 days.
PREPARATION: Add clean water in the proportion indicated in the package for a bag of mortar. Using manual or mechanical mixing until obtaining a homogeneous, lump-free mixture. Wait 10 minutes until maturity and use 2h or temperatures above 30oC until 1h after preparation.
Do Reboco- the launch of mortar with a trowel or mechanically. The coating shall be done in layers of max 25mm. Apply the outer layer only when the previous one is tough enough. For more than 40 mm coatings, strengthen with use of galvanized screen. After pulling, sarrafear with aluminum ruler if necessary and finish with wooden trowel and sponge.
Contrapiso- Spread and compact the mortar over the previously dampened base sarrafear with metal ruler and finish with wooden trowel. It is recommended that the floor has a minimum thickness of 20 mm and for maintaining a moist cure at least 3 days.
Plastering - 18Kg / m² per cm of thickness
Contrapiso- 18Kg / m² per hundred thick.
SAFETY: Keep out of reach of children and pets. In case of eye contact or accidental ingestion, seek medical advice immediately, taking this container.
STORAGE: About pallets in open, dry, airy location away 30 cm from the wall. Batteries should be a maximum of 1.5 meters in height.
DEADLINE: Deadline for 180 days.
Saco de 25 Kg
MASSA READY PROJECTABLE EXTERNAL FINISH:
© 2013 by SuperMassa. All rights reserved.
Now the chat!
Learn about our companies
For technical support and financial affairs, open a ticket at our Customer Service by clicking here.
For sales questions, contact requests or suggestions, please complete the form below.